Starting at €0.00
Underlay membrane four-layer membrane highly vapor permeable, waterproof and windproof ideal for roof and wall protection and thermal insulation against bad weather conditions (wind, rain, snow, dust). The membrane regulates the humidity level in the room by letting out what is in excess. The membrane can be installed both in the light sheath of the roof (wooden slats and false ceilings) and in the complete roof covering (OSB, plywood, etc.). It can be placed directly on the insulation. Highly resistant to aging. The metallized layer reflects the rays contributing to the energy balance.
Water vapour transmisson: Sd < 0,3 m
- Type of material: PP + PP + ALU + PE
- Length: 50 m (-) 0%
- Width: 150 cm (-) 0,5% / (+) 1,5%
- Straightness: < 30 mm/10 m
- Mass per unit area: 200 g/m2 (±) 5%
- Reaction to fire: E
- Water vapour transmission (Sd): < 0,3 m
- Impermeability class: W1
- Tensile strength (MD/XD): 350 N / 5 cm (+) 20% / 190 N / 5 cm (-15%; + 25%)
- Elongation at break (MD/XD): ~ 30% / ~ 70%
- Resistance to tearing (MD/XD): 200 N (-20%; +35%) / 200 N (-25%; +30%)
- Flexibility at low temperature: à (-) 30° C
CE-EN
Underlay membrane four-layer membrane highly vapor permeable, waterproof and windproof ideal for roof and wall protection and thermal insulation against bad weather conditions (wind, rain, snow, dust). The membrane regulates the humidity level in the room by letting out what is in excess. The membrane can be installed both in the light sheath of the roof (wooden slats and false ceilings) and in the complete roof covering (OSB, plywood, etc.). It can be placed directly on the insulation. Highly resistant to aging. The metallized layer reflects the rays contributing to the energy balance.
Water vapour transmisson: Sd < 0,3 m
- Type of material: PP + PP + ALU + PE
- Length: 50 m (-) 0%
- Width: 150 cm (-) 0,5% / (+) 1,5%
- Straightness: < 30 mm/10 m
- Mass per unit area: 200 g/m2 (±) 5%
- Reaction to fire: E
- Water vapour transmission (Sd): < 0,3 m
- Impermeability class: W1
- Tensile strength (MD/XD): 350 N / 5 cm (+) 20% / 190 N / 5 cm (-15%; + 25%)
- Elongation at break (MD/XD): ~ 30% / ~ 70%
- Resistance to tearing (MD/XD): 200 N (-20%; +35%) / 200 N (-25%; +30%)
- Flexibility at low temperature: à (-) 30° C
CE-EN