Starting at €0.00
- Exclusive patented design for a fast installation thanks to the self-tapping cone
- It does not create thermal bridge
- The self-tapping cone creates a perfect home within the insulating material
- Insulation thickness from 60 to 200 mm on empty brick and from 60 to 240 mm on solid brick/concrete.
- For fastening of heavy loads on thermal insulation systems completed, directly on the coating. Fixing with two-component resin. Threaded bush M12 with accessories in stainless steel for installation included in the packaging. For fixing of heavy loads: brackets, air conditioners, shelters, canopies, awnings, handrails, satellite antennas. Concrete, solid brick, hollow vertically bricks, hollow blocks of lightweight concrete, solid bricks of calcium silicate, calcium silicate bricks, autoclaved aerated concrete.
- Follow carefully the instructions.
- To prevent water seepage in the insulating material, it is recommended to seal the edge with silicone or acrylic sealant.
- Strictly observe the load shown in the tables.
PAT.PEND.
- Exclusive patented design for a fast installation thanks to the self-tapping cone
- It does not create thermal bridge
- The self-tapping cone creates a perfect home within the insulating material
- Insulation thickness from 60 to 200 mm on empty brick and from 60 to 240 mm on solid brick/concrete.
- For fastening of heavy loads on thermal insulation systems completed, directly on the coating. Fixing with two-component resin. Threaded bush M12 with accessories in stainless steel for installation included in the packaging. For fixing of heavy loads: brackets, air conditioners, shelters, canopies, awnings, handrails, satellite antennas. Concrete, solid brick, hollow vertically bricks, hollow blocks of lightweight concrete, solid bricks of calcium silicate, calcium silicate bricks, autoclaved aerated concrete.
- Follow carefully the instructions.
- To prevent water seepage in the insulating material, it is recommended to seal the edge with silicone or acrylic sealant.
- Strictly observe the load shown in the tables.
PAT.PEND.