Starting at €0.00
- Exclusive patented design and unique product on the market designed to accommodate threaded rods or pre-installed threaded rods
- It does not create thermal bridge
- Suitable for standard screws (in the variation with hole) or threaded rods (variation with bushing)
- Covering with white, black or dark brown washer (page 125)
- Stabilizing fins and undercuts for a perfect fit
For fastening of medium loads on thermal insulation systems, directly on the coating. Fastening through pre-hole with cutter diameter 27 mm (with glue), the products can be found on page 124 of the catalogue. Pre-molded hole for chipboard screws, hook screws and eylets diameter 3,5 mm and 4,5 mm, threaded bushing M4 - M5 - M6 - M8 - M10 or pre-installed threaded rod M6 - M8 - M10 - M12. For fastening of medium loads: residents’ mail boxes, video monitoring systems, signs, lighting systems of medium size, hose for drainpipe, latches and locks for windows.
- Follow carefully the instructions.
- To prevent water seepage under the head of the anchor and the insulating material, it is recommended to seal the edge with silicone or acrylic sealant at the end of the installation or before laying the washer.
- The fastening of the cylindrical anchor with glue is guaranteed only when using the sealant GofixTM produced by Akifix S.p.A. This is the only product on the market and is designed to create a strong connection between polystyrene and plastic, for more information see the catalogue on page 122. Standard glues do not guarantee the fastening. PAT. PEND.
- Exclusive patented design and unique product on the market designed to accommodate threaded rods or pre-installed threaded rods
- It does not create thermal bridge
- Suitable for standard screws (in the variation with hole) or threaded rods (variation with bushing)
- Covering with white, black or dark brown washer (page 125)
- Stabilizing fins and undercuts for a perfect fit
For fastening of medium loads on thermal insulation systems, directly on the coating. Fastening through pre-hole with cutter diameter 27 mm (with glue), the products can be found on page 124 of the catalogue. Pre-molded hole for chipboard screws, hook screws and eylets diameter 3,5 mm and 4,5 mm, threaded bushing M4 - M5 - M6 - M8 - M10 or pre-installed threaded rod M6 - M8 - M10 - M12. For fastening of medium loads: residents’ mail boxes, video monitoring systems, signs, lighting systems of medium size, hose for drainpipe, latches and locks for windows.
- Follow carefully the instructions.
- To prevent water seepage under the head of the anchor and the insulating material, it is recommended to seal the edge with silicone or acrylic sealant at the end of the installation or before laying the washer.
- The fastening of the cylindrical anchor with glue is guaranteed only when using the sealant GofixTM produced by Akifix S.p.A. This is the only product on the market and is designed to create a strong connection between polystyrene and plastic, for more information see the catalogue on page 122. Standard glues do not guarantee the fastening. PAT. PEND.